ssa
ssa
这是描述信息

YUSHENG MOTORCYCLE SPARE PARTS 

Advanced Technology、Outstanding Quality、Perfect Service

GRANDEUR

With advanced technology, excellent quality and perfect service, it has won unanimous recognition in the domestic and foreign markets, and has established long-term and good cooperative partnership with well-known large enterprises at home and abroad.

About Yu Sheng 

Quanzhou Yusheng Motor Vehicle Parts Co., Ltd.

       Quanzhou Yusheng Motor Vehicle Parts Co., Ltd. is located in Meili Yongchun, known as "hometown of Lugan". Yusheng Motor Vehicle Parts Co., Ltd. is a company that has developed and produced automatic brake pads for nearly 30 years, and more than 80% of the brake pads are supplied to supporting facilities. Under the guarantee of 30 years of brake pad experience in this research, we have formally developed and produced motorcycle brake pads. All of our brake pads are of high density.  Impurity-free aluminum alloy is die-cast by a 180T large-tonnage full-automatic mechanical arm die-casting machine...

GRANDEUR

CORPORATE ADVANTAGE

3000Ten thousand

Registered Capital

30+

Set Up

2000Ton

Monthly Delivery Volume

300+

Number of Employees

PRODUCT CATEGORY

Diamond Leopard SUZUKI EN
查看详情 白箭头 黑箭头

NOTICE

With advanced technology, excellent quality and perfect service, it has won unanimous recognition in the domestic and foreign markets, and has established long-term and good cooperative partnership with well-known large enterprises at home and abroad.

NEWS & EVENT

11-16

Composition of Brake System and Explanation of Common Maintenance

Braking is the most important thing for vehicle driving safety. Even if the vehicle has other system faults, if the brake is effective, the driver can stop the vehicle to avoid collision, collision with people and wall. In the process of using, installing, replacing and maintaining the brake, if you don't pay attention to it a little, it will bury hidden dangers for causing great disaster. The following is a summary of the basic composition of the brake system and the daily maintenance of the brake.
09-26

The qualified rate of domestic brake pads is better than that of imported ones.

A total of 467 batches of brake linings for imported automobiles were randomly selected and 226 batches were found to be unqualified, with an unqualified detection rate of 48.4%. The unqualified items include signs, friction performance, shear strength and compressive strain, and the overall quality and safety situation is worrying. The spot check covers the main circulation areas of commodities such as the domestic market, cross-border e-commerce and distribution centers for imported products. Among them, 71 batches were randomly selected at ports, 8 batches were unqualified, 388 batches were randomly selected in the circulation field, and 211 batches were unqualified. E-commerce platform checks 8 batches and fails 7 batches. From the point of origin, the commodities sampled involved 18 countries or regions of origin, of which Japan, Germany, South Korea, Italy and the United Kingdom had relatively large import quantities, with the unqualified detection rate reaching 52.5% on average. From the brand point of view, the spot check involves more than 60 brands, including Toyota, Mercedes-Benz, Land Rover, Hyundai, BMW and many other well-known brands. There were more than 10 batches of unqualified brands in the spot check: Land Rover, Toyota, Audi, Timington, Volvo, Hyundai, Mercedes-Benz, Volkswagen, Kia and BMW. The random inspection products are tested strictly in accordance with China's mandatory standard GB 5763-2008 "Brake Lining for Vehicles". The testing items include appearance quality, dimensional tolerance, friction performance, shear strength, impact strength, thermal expansion rate, compressive strain and packaging marks. Statistics show that unqualified items include: signs (174 batches, accounting for 77.0%); Friction performance (80 batches, accounting for 35.4%); Shear strength (8 batches, accounting for 3.5%); Compression strain (3 batches, accounting for 1.3%) (Note: the same commodity may involve multiple nonconformities at the same time). Among them, the "unqualified mark" is mainly manifested as the product packaging has no Chinese mark, the Chinese mark is incomplete and the designated friction coefficient is not printed. It is worth noting that if the specified friction coefficient is not indicated on the logo, some items of friction performance cannot be tested. Therefore, unqualified marks also involve potential safety hazards. It is understood that the General Administration of Quality Supervision, Inspection and Quarantine has once again organized key supervision and spot checks on the quality of imported brake pads. The results of the spot checks will be announced in the near future. For products that fail to pass the spot checks, severe penalties will be imposed in accordance with relevant laws and regulations. In the second batch of products in 2016 organized by the State General Administration of Quality Supervision, Inspection and Quarantine, brake linings for domestic automobiles were randomly selected. This time, 60 batches of brake linings for automobiles produced by 60 enterprises in 12 provinces and municipalities directly under the Central Government, including Beijing, Tianjin and Hebei, were randomly selected, and 3 batches of products did not meet the standards. The qualified rate is better than that of imported brake pads. According to GB 5763-2008 "Automotive Brake Lining" and other standards, spot checks were carried out on 8 items of automotive brake lining products, including friction coefficient, wear rate, allowable deviation of specified friction coefficient, impact strength, shear strength, thermal expansion rate and compressive strain (normal temperature, 400℃). The spot check found that 3 batches of products produced by 3 companies such as Huzhou Top Auto Parts Co., Ltd. did not meet the standards, involving the items of allowable deviation, wear rate and friction coefficient of the specified friction coefficient. TIPS: precautions for replacing brake pads When the thickness of the brake pad is less than the minimum maintenance standard allowed by the vehicle manufacturer (usually when the thickness is 1/3 of the original one); When the wear alarm switch on the brake pad has already given an alarm; When brake pads are contaminated by oil or grease; When brake pads make abnormal noise during braking; In general, if the thickness difference between the two sides of the brake pad on the fixed brake caliper reaches 1.5mm, the thickness difference between the two sides of the brake pad on the floating brake caliper reaches 3.0mm, it needs to be replaced. However, it is impossible to accurately judge whether the brake pad is excessively worn through simple appearance observation. It is better to measure the thinnest part of the brake pad with a ruler to see whether it is within the allowable range (according to the maintenance manual of specific vehicle type). During use, special attention should be paid to the fact that the vehicle run
09-26

Why did the newly changed brake pads make a noise? The secret is here!

Some car owners and Xiaobian talked about the abnormal sound of the newly changed brake pads, even when the car was going straight. What's wrong with the car? Or is it the newly replaced brake pad?

FEEDBACK

Quanzhou Yusheng Motor Vehicle Parts Co., Ltd. is a professional manufacturer with 30 years of research, development and production of automatic brake pads.  With advanced technology, excellent quality and perfect service, the company has been consistently recognized by the domestic and foreign markets and has established long-term good partnership with well-known large enterprises at home and abroad.

Quanzhou Yusheng Motor Vehicle Parts Co., Ltd.

Product display

Contact us

Add: Bangde Industrial Zone, Yongchun County, Quanzhou City, Fujian Province
Tel: 
0595-23827123

Fax: 0595-23817333

E-mail: 641125551@qq.com

facebook
Twitter

Copyright © 2020 Quanzhou Yusheng Locomotive Parts Co., Ltd. All rights reserved
Powered by www.300.cn  闽ICP备14014350号